DEVIreg™ Smart — a multifunctional programmable electronic thermostat with a built-in remote control function for mobile devices.
Simple setup using the "Installation Wizard", which takes into account the specific characteristics of the room/floor. Can be installed with different manufacturers. Equipped with a built-in air temperature sensor and complete with a wire-mounted temperature sensor. Compatible with temperature sensors from other manufacturers**.
DEVIreg™ Smart is used (programmed) for:
"Warm floor" system with a wire-mounted temperature sensor or
full heating system with a built-in air temperature sensor and a wire-mounted floor temperature limit sensor.
Intellectual timer with forecastom time include and offiya, two comfort period for each day week.
Built-in "away/holiday" modes, energy saving mode and frost protection.
, , , ...
power supply voltage:
220...240 V~ 50/60 Hz
active load, max.:
16 А, 3680 Вт (230 В)
inductive load, max.:
1 А, cos ф = 0,3 (230 В)
load switch:
relay, two contacts, NO
regulation:
pulse width modulation (PWM, PWM), cycle 20/40/60 min.
range regulation:
floor: 5...45 °C, air: 5...35 °C
limitation max t°C пола:
20....35 °C (20...45 °C without jumpers)
limitation min t°C пола:
10....35 °C (in air+floor mode)
temp, frost protection:
5.....9 °C (factory setting 5 °C)
connection contacts, max.:
1x4 mm2 or 2x2.5 mm2
dimensions:
84 x 84 x 44 mm
frame type*:
DEVI design
IP class:
IP21
operating temp, ambient:
0...30 °С
power consumption:
0.4 W in standby mode
built-in battery:
24 hours (for clock, date, power consumed for 7 and 30 days)
